Current Transformer (CT)- CAST RESIN
We cover practically all possible combinations of ratios, burdens, accuracy classes and voltages up to and including 36 kV indoor and outdoor (with special Resin) type.
Applicable Standard
- IS 2705/1992
- IS 16227-2
- IEC 61869-2
- IEEE -C57.13
Voltage Transformer (VT/PT)- CAST RESIN
We cover practically all combinations of ratios, burdens, accuracy classes and voltages up to 36kV.
Applicable Standard
- IS 3156
- IS 16227-3
- IEC 61869-3
- IEEE -C57.13
Neutral Grounding/Earthing Transformers (NGT/ET)-CAST RESIN
- Range: 36kV, 200KVA.
- Connections: 3PH, ZigZAG & 3PH Star Delta.
Applicable Standard
- IEC 60076 part-11/BIS 2026 part-11
Technical Specification
| Age | |
|---|---|
| Reference Standard | BIS, BS, IEC, IEEE |
| Voltage Class | 36kV |
| Test Voltage | 70kV RMS & 170 kVp |
| Rated Primary Voltage | 23500V |
| Rated Secondary Voltage | 500V |
| Insulation Class | A, B, F,H,C |
| Frequency | 50 Hz & 60Hz |
Dry Type Transformer and Windings/Coils Set (CRT/VPI)
We design, manufacture, inspect, test, pack and deliver product as per customer demand. We offer an extensive Range of..
- Coil Set (VPI/CRT)
- Core Coil Assembly for DT-CCA (VPI/CRT)
- Core Coil Assembly for NGT (CRT)
- Alternatively, we also undertake jobs as per customer design and drawings.
Technical Specification
| Age | |
|---|---|
| Ratings | Upto 3150KVA |
| Voltage Class | 36kV |
| Frequency | 50Hz & 60Hz |
| No of Phase | Single & Three Phase |
| Cooling | AN/AF |
| Vector Group | As Per Customers Requirement |
| Winding | Strip/Foil |
| Material | Aluminium/Copper |
| Tappings | OCTC OCTL |
| Insulation Class | F, H, C |
| Applicable Standard | IEC 60076 Part-11/BIS 2026 Part-11 |
| Losses and Efficiency | As per IEC 60076 Part-20/ECBC NORMS 2017 |
| Resin System Compliance | E2 C2 FI as per IEC 60076 part-11 |
| Protection | IP:00 |
Oil Surge And Gas Operated Relay (Buchholz Relay)
- Unique proprietary connection bushing to ease out connections at site. It can accommodate 3 switches of NO/NC like Alarm, Trip, Scada signal or 2 switches of change over type.
- Reliable, time-tested magnetic reed switch of various ratings.
- Unique internal design to prevent falls alarm due to air traps on top of the relay.
- Anti-vibration mounting pads to give high stability against mechanical shocks and vibrations.
High Voltage Test Set (HiPot Tester)
- Input: 230AC,1 PHASE,50HZ
- Output: 0-70KV
- Monocoque Design upto 5kv & Two part set upto 75kv
Oil/Liquids Breakdown voltage Test Set (BDV)
- Input: 230AC,1 PHASE,50HZ
- Output: 0-100KV
- Suitable for Fluid: As per IS 335, IEC 60296, IEC 62770, IEC 61099, IEC 60836
- TESTING: As per IEC 60156
Solid State Earth Leakage Relay with CBCT (ELR)
- Earth Leakage Relays are used to detect potentially dangerous earth leakage fault currents & isolate the load by tripping the relay before they cause any hazard.
Applicable Standard
- IEC 60755
- IEC 62020
Technical Specification
| Age | |
|---|---|
| Relay Setting | 50mA to 5Amp. |
| Times Setting | 0.1 Secs to 5 Secs. |
| Auxiliary Voltage | 110/220/440/550 Volts |
| Auxiliary Contact | 1 or 2 C/O Contacts |
| CBCT Diameter | 40mm to 400mm and as per customers requirement |
Aqua Welder
- Portable and compact Oxy-Hydrogen flame welder.
- Non-toxic, low-pressure flame.
- No bulky storage for gas cylinder.
- Safest as total elimination of explosive hazard.
- Environment friendly as water is only by-product.
- Versatile to accommodate various sizes by adjusting flame.
- Cost-effective, the only consumables are electricity, distilled water and methyl.